Replacement carb for clinton c700

razerface · Sep 12, 2021

What carb can i put on clinton c700 to replace busted LMG 8?
Anyone recognize this cast iron wheel system?

This post was edited by razerface on 09/12/2021 at 02:54 pm.

Gene Davis (Ga.) · Sep 12, 2021

Good luck, I have been trying to find one for my Clinton to replace the LMG with the main jet threads stripped out. I tried JB weld on them but it did not hold. Some Tecumseh carburetors will fit just have to change the throttle shaft and possibly the choke shaft

razerface · Sep 13, 2021

(quoted from post at 13:48:54 09/12/21) Good luck, I have been trying to find one for my Clinton to replace the LMG with the main jet threads stripped out. I tried JB weld on them but it did not hold. Some Tecumseh carburetors will fit just have to change the throttle shaft and possibly the choke shaft

I just spoke with Jim's Antique Small Engine Parts in Idaho. He fixes the stripped out threads with a helicoil. $50-60 depending on condition of carb. Carb will come back cleaned and repaired.

Gene Davis (Ga.) · Sep 13, 2021

Thanks for the info. For that price I will have to think on it for a while now.

Replacement carb for clinton c700

razerface

New User

Gene Davis (Ga.)

Well-known Member

razerface

New User

Gene Davis (Ga.)

Well-known Member

Similar threads