I need to make sure that the hydraulic oil is full on our Long 610 but I also don't want to overfill it and take a chance on blowing any seals and having to replace them.
The manual, as well as some posts I've read online say to "fill to the top mark."
The top mark on our dipstick says "DT," which is the 4x4 tractor, right? Does my 4x2 fill to the same level as the 4x4? The dipstick in our tractor has 2 marks on each
side of it, all of them at different heights up the stem of the dipstick. I've attached a picture of the dipstick in or tractor. I'm thinking the RH is the fill mark we
should use but, if it's the top mark, that'd be the "DT" mark for 4x4 models. Even the marks on the other side of the stick aren't as high as the "DT."
Can someone help me? If the "DT" mark is where we need to fill it, great. But, like I mentioned, I just don't want to overfill and blow seals out. Thanks.
The manual, as well as some posts I've read online say to "fill to the top mark."
The top mark on our dipstick says "DT," which is the 4x4 tractor, right? Does my 4x2 fill to the same level as the 4x4? The dipstick in our tractor has 2 marks on each
side of it, all of them at different heights up the stem of the dipstick. I've attached a picture of the dipstick in or tractor. I'm thinking the RH is the fill mark we
should use but, if it's the top mark, that'd be the "DT" mark for 4x4 models. Even the marks on the other side of the stick aren't as high as the "DT."
Can someone help me? If the "DT" mark is where we need to fill it, great. But, like I mentioned, I just don't want to overfill and blow seals out. Thanks.