Putting a clutch in the White. Earlier serial number tractors used a 6 lever type pressure plate. Seems there are three pressure plates that were used.
All seem to interchange what Ive learned?? These clutches push quite hard. Is there any advantage a 6 lever verse a three lever? Probably
squeezing the same number of springs, but is one type pressure plate made with more mechanical advantage? Wondering what is your experience?
Thanks
All seem to interchange what Ive learned?? These clutches push quite hard. Is there any advantage a 6 lever verse a three lever? Probably
squeezing the same number of springs, but is one type pressure plate made with more mechanical advantage? Wondering what is your experience?
Thanks