Oliver 77 head gasket

Oliver owner

New User
Location
Maine
I'm new to this forum and mechanic work in general.

I pulled the head off my 77 for a valve grind and apparently the previous owner had the engine modified for pulling. It has been overbored to 3 7/8 with after market pistons and sleeves. I am having trouble finding a replacement head gasket for it. The one that was on it was a fel-pro. The numbers are hard to read but I think its 7878b 7887. It, and variations, dont come up on fel-pro's website as a valid part number. I'm wondering if a gasket from a newer Oliver would work.

Thanks in advance.

Ill try to upload a pic

cvphoto128231.jpg
 
My puller 77 had a 4-inch bore. I got by using the 3 3/4 gasket but could only get them by purchasing the valve grind gasket set. gm
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top