1550 throttle update

super99 · Aug 28, 2021

I tried putting a cotter pin in the hole and the spring I had was too short and pulled the pin out. Back to Menards and got a longer spring and a 1/4 eye bolt and put it in. Got it adjusted and drove it about 5 miles and the throttle stayed like it should, I think I have it fixed. Thanks again for the help!!

Mike(NEOhio) · Aug 29, 2021

What size pin did you use? If you missed my reply in your earlier post it's a 3/16 x 1 cotter. It would take a lot to pull it out. But your fix is good too.

super99 · Aug 29, 2021

All that I had was a smaller pin, so I tried that but I think the first spring that I had was too short. I already had the eye and longer spring installed before I saw your post.

1550 throttle update

super99

Well-known Member

Mike(NEOhio)

Well-known Member

super99

Well-known Member

Similar threads