1465 clutch

Case Puller · Apr 3, 2021

Looking at a 1465 oliver.Owner says clutch is out from a load of silage pushing on tractor down a steep hill. Is it a hard job to replace the clutch?

rrlund · Apr 3, 2021

Not terrible, but not cheap. I've replaced the one in my 1365 twice. They're a fairly easy split, but that clutch sits inside the
pressure plate and the PTO clutch runs against the flywheel. I've taken mine to Clutch Dynamics both times and both times they said
the pressure plate unit was worn too bad to rebuild. Last time was going on two years ago. The whole unit cost me $680 if memory
serves me right. At the time, AGCO was $775 for a rebuilt.

Traditional Farmer · Apr 3, 2021

Wonder where you can find a clutch for a 1465? Is the clutch not engaging or not releasing?

Case Puller · Apr 3, 2021

(quoted from post at 07:34:29 04/03/21) Wonder where you can find a clutch for a 1465? Is the clutch not engaging or not releasing?

uy says the tractor has been sitting a number of years.Cant remember all the details.Said something let looseinthe clutch going down a hill with a chopper box.

rrman61 · Apr 4, 2021

Call ricks ag parts he has a lot of knowledge about
these tractors as well as parts

1465 clutch

Case Puller

Member

rrlund

Well-known Member

Traditional Farmer

Well-known Member

Case Puller

Member

rrman61

Well-known Member

Similar threads