super 55
Well-known Member
- Location
- Whonnock BC
I have been working on my Super 55 very very slowly. Everything has been replaced or repaired and painted, but not completely assembled. I ran into a fight with cancer that pushed projects aside and now it's time to catch up. For now I am cancer free and ready to finish up what I started. I have the shop manual, the IT manual, and the parts book. But I might have to ask some obvious questions when it comes to the assembly since it's been awhile since parts were removed. I love that the parts book has such detail as right down to the correct nut and bolt to use.
It has been fun tracking down parts. A thank you to Korves Oliver, Mitch and Marv from Everson Equipment in Everson WA (used to be an Oliver dealer), and Kent the Super 55 parts guy in Texas.
I also have a two bottom plow and a manure spreader that I will probably get at later. I also have a 1948 two ton Chevy that needs a lot of paint and assembly too. But tractor first. The truck is supposed to be used for hauling the tractor to shows.
It has been fun tracking down parts. A thank you to Korves Oliver, Mitch and Marv from Everson Equipment in Everson WA (used to be an Oliver dealer), and Kent the Super 55 parts guy in Texas.
I also have a two bottom plow and a manure spreader that I will probably get at later. I also have a 1948 two ton Chevy that needs a lot of paint and assembly too. But tractor first. The truck is supposed to be used for hauling the tractor to shows.