I did an in frame rings and valve job send the injectors away and hade a seal kit put into the pump I had Cell energizers out and cleaned Now I have to use ether to get it to start when it first starts it it kind of pops but when it warms up it runs nice I can Idle it right down to 600 But when I rev It up it runs a little rough
I timed the pump to the proper marks To me it seems like the timing might be out It ran OK before other than the oil consumption I would welcome any ideas
I timed the pump to the proper marks To me it seems like the timing might be out It ran OK before other than the oil consumption I would welcome any ideas
