Oliver 4340 Plow Part

I'm looking for a cylinder lift pivot assembly for a 4340. According to the book I have, the part number is maybe TP-3252-A, but that picture doesn't look quite the same as either plow I have. The parts book shows it without a piece on what would be the inside...

On both of my plows, this part is damaged. I'd like to find at least one to use as a pattern. I cannot find anything with this part number, not through a dealer, not through the depot, not anywhere on the internet... Usually you can find something..

Picture of the one I bought recently is attached.

Anyone got a good part number? Maybe one of these laying around?

thanks

mvphoto51168.jpg


mvphoto51169.jpg
 
From the photo it looks like the hole where the cylinder attaches is worn. If so any good welding shop can repair it and it will be better than a used one will be.
 
The hole is offset towards the front. The issue is that the part sticking up has been cut and rewelded in a different place. My other plow with this part has been broken and welded a couple times. I'm not sure either is exactly right, hence the hope to find one that I can use as a pattern.

I've got both at my welding shop to make the one in the picture like the other, but was a reach to see if anyone had a good one...
 
I appreciate that, but I was really looking for one to buy. I'd think there would still be some somewhere, but I am not sure I have the exact right part number.

Thanks
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top