1600 power beyond

Take off the flow divider and put a quarter inch pipe plug in the threaded hole under it,then put it back on. (See arrow)

cvphoto6772.png
 
Yes. If it was me,I'd just use the hose positions in this picture. This is for the 50 series tractors and the plug to create pressure goes in a different place. You'll have to put the plug where I told you to in the first picture,use the hose position in this picture.

cvphoto6780.jpg
 
If the ports in the second picture fail,just take out the plugs in the first picture and crank it over to see which one has pressure. I think it's the one in the rear,but don't bank on that.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top