oliver66

chucksoliver77 · Jan 14, 2020

I have a 66 gas tank that is rusty on the inside and leaks. What would be the best tank liner for this? I did one years ago but can't remember what I used. Thanks in advance, Chuck

tom upton · Jan 14, 2020

Not really answering your question but there are 2 other options - make your own tank. Unless your stuck on it being original its not that hard to duplicate a tank. I have fabbed up a couple. Just use the old filler neck and you cant tell unless you look under side covers. Even made one from stainless for 1900. (Had visions of putting turbo on it at one point so couldn't have tank over engine) Just make sure you leak test after welding. Other option is find a decent used tank.

rrlund · Jan 15, 2020

I used Red Kote in mine.

Ken Grimm · Jan 15, 2020

I may have a good tank.

Traditional Farmer · Jan 16, 2020

Gas tank for a 66 in the classified ads here.

oliver66

chucksoliver77

Well-known Member

tom upton

Member

rrlund

Well-known Member

Ken Grimm

Member

Traditional Farmer

Well-known Member

Similar threads