Oliver fender

Scout2008

Member
I posted on the MM forum the other day
about a G955 I just bought. I have reached
out to a few people including j schwiebert
with some questions about the Oliver parts
on it that I am not familiar with. It has
a cab that I plan on removing and making
it an open station again. One of the
fenders is pretty bent up that came with
it and it's missing the mounting bracket
for that side. It's the left side that I
need. Does anyone know of a fender and
bracket in the Ohio area? The right fender
is in pretty good shape (what issues it
has are not hard to fix). Also it has
20.8-34's on the rear with 16" fronts. If
I change it to 18.4-34's will it make the
back sit too low, and if so what would it
take to change it to 18.4-38's other than
tires and rims? The picture of the fender
with the bracket is obviously the good
one, the other picture is of the twisted
left fender. I appreciate any advice and
help.
cvphoto44309.jpg


cvphoto44310.jpg


cvphoto44311.jpg
 
All our Canadian 955's(1870) came with cabs. Have seen one in US that is red 1870 with cab removed. Have same cab on my 2270 but no fenders just fuel tanks. All Cockshutts same. Back 1/2 is pure Oliver.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top