Oliver ?55 series road lights

Sorry, I don't know exactly how they'd be wired from the factor, but here's how I usually try to do them...

Switch = "Road" or "Road Dim" (if available)
Outer fender lights on, rear red on, flashers on

Switch = "Road" (if dim option available)
All forward lights on (grille, all fenders), rear red on, flashers on

If the fenders have inner and outer lights, I usually tie the inner lights together with the grille lights and adjust them out wider, so the outer fender lights can be directed farther forward, around the nose of the tractor.

I also like to run a red light AND a flasher on each fender, not factory, but would rather be safe than "factory". Also usually have a white light on the back of each fender, again, not "factory", but I like it better.
 

From an 1855 manual

mvphoto34929.png
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top