1650 stack weights

relink · Mar 5, 2019

I have a 1650 with the starter weight already on it and I just purchased 2 more stack weights for it. My question is how do I bolt the 2 new stack weights to the starter weight?

J. Schwiebert · Mar 5, 2019

A long bolt that attaches the stack weight to the base weight. The reason there are 2 holes in the stack weight is so when you put another weight on you use the other hole to attach the second one.

relink · Mar 5, 2019

(quoted from post at 20:04:19 03/05/19) A long bolt that attaches the stack weight to the base weight. The reason there are 2 holes in the stack weight is so when you put another weight on you use the other hole to attach the second one.

So this time I just use 1 long bolt to hold them on and if I should add more weights in the future I can use the other hole with a longer bolt. Correct?

oliverkid · Mar 5, 2019

If I remember right you need 7 inch long 3/8 bolts. The
recesses cast in the bottom of the weights are shaped to trap
square nuts so if you can get your hands on some that will
make life easier.

1650 stack weights

relink

New User

J. Schwiebert

Well-known Member

relink

New User

oliverkid

Member

Similar threads