The 150

oliverkid · Jan 22, 2019

Been below freezing for the last couple days. Hard to believe I took this pic just 2 weeks ago. It was a beautyful 50 degree day and I was getting hot wearing a sweatshirt. Got a lot of power washing done that day though. Spring can?t get here soon enough.....

Agco-iron · Jan 22, 2019

Heck of an improvement over the ugly dual pipes and it had when you first got it! Have you addressed the problem with the oil transfering into the transmission yet?

oliverkid · Jan 23, 2019

It has what I would call a bandaid on it right now. Dumped 3 grand in the three speed and put it back together. Need to find 2 parts off a late model 150 to make it right so that?s going to be a future project.

BossEliminator · Jan 23, 2019

I take it you need the updated output quill shaft with the two oil seals on the PTO shaft.

Mr.Ferguson · Jan 23, 2019

It?s nice to see it, it certainly has been a minute! Looks way nicer than anything I have, but that?s not hard to do

oliverkid · Jan 23, 2019

That and the updated trunion support with the steel insert.

The 150

oliverkid

Member

Agco-iron

New User

oliverkid

Member

BossEliminator

Member

Mr.Ferguson

Member

oliverkid

Member

Similar threads