Oliver 77-880 tractors with loaders

4010 puller · Dec 12, 2018

Hi guys, how much loader work do you guys still do with these old tractors? Does this series lift round bales ok? Anyone using the old tractors with modern loaders on them? Would like to see some pictures

NY 986 · Dec 12, 2018

Most I have seen use an independent hydraulic circuit as the Oliver setup is not the speediest nor has a lot of reserve fluid capacity for single acting cylinders.

Olliejunkie · Dec 12, 2018

(quoted from post at 14:45:56 12/12/18) Hi guys, how much loader work do you guys still do with these old tractors? Does this series lift round bales ok? Anyone using the old tractors with modern loaders on them? Would like to see some pictures

I just got done moving some 8x14 shop doors with my super 88. Had I known I would have took pics. Mine works great but the steering is much to be desired.

4010 puller · Dec 12, 2018

Ok you talking a pump that mounts to pto shaft?

greg krush · Dec 13, 2018

I have farmhand F11 loaders on a pair of 77s, One 77 I have had since 1978, loaded feed and big square bales for 50-100 cows thru the 90s, a bit hard to turn but worked well, still use it to load a few things and dump manure into a composter as it has a narrow bucket. the other 77 I put power steering on and use it quite a bit for odd lifting and have a set of forklift teeth that I leave mounted on it, works good for cleaning up brush as well. both have 23 gallon per minute pto pumps for the loader hydraulics. I do use my 1655 with loader much more but still value the 77s.

NY 986 · Dec 14, 2018

Mostly a PTO pump but I have seen a couple that have driven off of the front crank pulley.

Oliver 77-880 tractors with loaders

4010 puller

Well-known Member

NY 986

Well-known Member

Olliejunkie

Well-known Member

4010 puller

Well-known Member

greg krush

Member

NY 986

Well-known Member

Similar threads