Oliver plow

I have a oliver 3214 plow that was built to use on the Super series tractors. It was a 4-h project for my Grandson. Everything is correct except the coulters, they have J.I. Case stamped on them. I was wondering what the value of the plow is. I tried to post pictures but wouldn't let me. Thanks John
 
Where are you located? Have you checked with any of the people that deal in plow parts . What type of coulter and what diameter are the Case coulters? A friend of mine bought one for $150.00. Around here that type of utility tractors used in plow days are not too common.
 
The plow is a 3 pt 3 bottom 14 inch cut. The coulters are double arm and about 18 inches in diamenter. I am located in central Iowa. I thought this plow was made for the Super 77s with factory 3 pt.
 
My former neighbor had been looking for 3 -14's for his 550 and found one 150 miles away. Around here Super 77 & 88 tractors with a 3 point hitch old and new style were very rare, probably less than 2% had them.
 
The plow is in good shape, the bottoms are good as are the shins. Lays are far from worn out. I could email pictures to you but they wont let me post them here.Give me a email address and I will send them to you. Thanks John
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top