Got factory mounts for a 1730QA loader to a 2-85. Everything lines up perfectly for the mounts. Spacing of bolts only seem to line up one-way and nothing has been modified.
So when I drive into the loader, the cones on the rear mount are bottomed out and front mount (pipe style) is about 1/2" shy of fitting snugly into the loader frame. Any ideas? I can't move the mounts as they do not have adjustment, just single holes. I don't have the hydraulics hooked up yet as I need to do a few things first on that end so I can't move the bucket.
So when I drive into the loader, the cones on the rear mount are bottomed out and front mount (pipe style) is about 1/2" shy of fitting snugly into the loader frame. Any ideas? I can't move the mounts as they do not have adjustment, just single holes. I don't have the hydraulics hooked up yet as I need to do a few things first on that end so I can't move the bucket.