sparky30_06
New User
Anyone point me in a good direction to somewhere I can get a 354 Perkins for my Oliver 1850. my block is junk, cam is junk, oil pan is junk and head could be junk too
- Thread starter sparky30_06
- Start date
Anonymous-0
Well-known Member
Don't be throwing that stuff too far away. Mostly likely you will need the oil pan since the1850 oil pan is longer than say a 2-105 White. Also there are different heads, blocks and over 50 different crankshafts. How well do you know your 354 Perkins engines?
Anonymous-0
Well-known Member
Send me your e-mail. I have got one with approx. 1000 hrs since being totally rebuilt.
sparky30_06
New User
Well seeing that there is a hole bigger than my fist threw the bottom of the pan and we didn't find all the pieces it's going to be tuff to fix the pan up. I'm not looking to put two motors into one, would be very happy to just drop a different one in and go.
sparky30_06
New User
Anonymous-0
Well-known Member
I got one out of a 510 massey
Anonymous-0
Well-known Member
O. K. The 1850 is a trunion mount engine. Combine engines and the White tractors did not use a trunion mount engine. I tried to send you an e-mail as well. J.
deerefanatic
Member
Hey, i've got an 1850 engine that I took out to do a cummins conversion. It's worn out basically, but DOES run... Needs a headgasket at the moment (hence my reasoning for tearing it down). But, it's all complete. IP, head, everything. The injectors were fully rebuilt in 09 with less than 200 hrs on em.
I'm just looking to get my Injector money ($270) + a little more than scrap value of the block... I'm located in northern WI
Let me know.
sparky30_06
New User
Deerefanatic, email me please [email protected] I'm in northern Illinois and would be interested in the motor.
300winchester
Member
go to
www.craigslist.org
look under (northern WI
in Ladysmith WI a guy has a 354, make an offer
http://northernwi.craigslist.org/pts/2107390300.html
You can PM me or call me: 715-532-9983 or my cell: 269-303-1637.
www.craigslist.org
look under (northern WI
in Ladysmith WI a guy has a 354, make an offer
http://northernwi.craigslist.org/pts/2107390300.html
You can PM me or call me: 715-532-9983 or my cell: 269-303-1637.
deerefanatic
Member
That would be me.
Ed's coming to pick it up tomorrow.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy