Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Ford 9N, 2N & 8N Discussion Forum
Order Ford 8N Parts Online

8N ?

Welcome Guest, Log in or Register
Author  [Modern View]
Popgun

02-17-2014 13:24:53




Report to Moderator

Anyone put in a new Lower Link Support Shaft aska Pin? part# NCA563C. It is not like the OEM. It will wedge itself into the casting as tighten and the original castellated nut will not fit and will needed to be replaced with a larger one.




[Log in to Reply]   [No Email]
Chuck NH

02-17-2014 17:48:44




Report to Moderator
 Re: 8N ? in reply to Popgun, 02-17-2014 13:24:53  
I went through that last summer. The old pins had 5/8" fine thread and the new ones are 3/4" fine thread. I was unable to get the 3/4" fine thread castle nuts, so I just cleaned the bore real good, installed the new pins, and just installed grade 8 3/4" fine thread regular nuts with thread lock.



[Log in to Reply]  [No Email]
Popgun

02-18-2014 02:08:00




Report to Moderator
 Re: 8N ? in reply to Chuck NH, 02-17-2014 17:48:44  
Well got it in Chuck, used to thick of washer so cotter pin wouldn"t line up -new washer did the trick. Put the trumpet back on and good to go.



[Log in to Reply]  [No Email]
L.B,

02-18-2014 01:38:08




Report to Moderator
 Re: 8N ? in reply to Chuck NH, 02-17-2014 17:48:44  
Thanks, it look like it is a better set up then the original? Guess time will tell.



[Log in to Reply]  [No Email]
Popgun

02-18-2014 02:15:01




Report to Moderator
 Re: 8N ? in reply to L.B,, 02-18-2014 01:38:08  
I did like it a bunch but just time consuming had to us the engine hoist its to heavy for 1 person to deal with. Let ya know on the flip flop.



[Log in to Reply]  [No Email]
pconnie

02-17-2014 14:24:06




Report to Moderator
 Re: 8N ? in reply to Popgun, 02-17-2014 13:24:53  
scroll down to a howard..r geiger just wrote how to do it..took me three tries so it showed 3 photos..



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy