Sawatch 8N
Member
Had time to put this A frame together from scraps I've had. Will use it to tow trailers.
- Thread starter Sawatch 8N
- Start date
Nice shop, Like the Flag!
I have used a hitch like that for years. Have pulled some very heavy loads, that close your tractor will handle a lot of weight. My 9 will handle almost 1,000 pounds on a homemade set of forks, and that is centered a good foot past the rear wheels. No front weights.
lots of luck joe
I have used a hitch like that for years. Have pulled some very heavy loads, that close your tractor will handle a lot of weight. My 9 will handle almost 1,000 pounds on a homemade set of forks, and that is centered a good foot past the rear wheels. No front weights.
lots of luck joe
Ultradog MN
Well-known Member
- Location
- Twin Cities
Nice job.
I enjoy making things like that myself and like seeing pics of the stuff others create.
I believe with the hitch that close to the lift arms you should be able to lift close to the max 900 lbs +/- the tractor is rated for.
Thanks.
I enjoy making things like that myself and like seeing pics of the stuff others create.
I believe with the hitch that close to the lift arms you should be able to lift close to the max 900 lbs +/- the tractor is rated for.
Thanks.
Sawatch 8N
Member
It's lightly built as far as weight on it so, the trailers will all be light tung weight, 1 7/8 ball.
I bought one of these a few years ago. Good little thing to have. Mine has the ball on the top too to move gooseneck trailers around. I thought the Ford would be to little but it works fine. However I had to put check chains on it because the weight of a gooseneck will push the arms down
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy