Lynn Patrick

Well-known Member
What would it take to mount a Ford 772 loader from an 801 on a 2110LCG? Can the mounts be modified fairly easy or would it be major? Tractors are not very close to each other for me to compare. Thanks for any info!
 
Are you sure you got your number correct?
Am pretty sure a 722 was never made to fit
a 4 cylinder tractor. They were for 3
cylinder tractors.
If it is truely a 772 it would have taken
some pretty heavy mods to the front to make
it fit the 801.
The loader below is a 772. It was on a 3600
that I bought. It would be a direct swap
onto your 2110.

cvphoto132756.jpg
 

No, MY fumble fingers - not yours.
Sorry.
I wrote 722 the first time and 772 the
second time.
A 722 was the all hydraulic one armed
bandit.

cvphoto132778.jpg


Hard to tell from your photos what all was
done or if it is a 772 or not. I could tell
with a photo of the main frame from the
side in front.
New Holland parts look-up says the 772 was
built from 1971 to 82.
 
Yes.
That is a 772. Pretty distinctive how the 2
main side frames bolted together in front
of the grill.
That made the main frame quite easy to put
on and take off of the tractor.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top