(800) 853-2651
SHOP NOW

Top Link Rocker

D

DonTheNewby

Member
Hello Gentlemen,

I have a 51 8n and needed to replace the Top Link Rocker. I originally had a 3 pin rocker.

I purchased an after-market one from our awesome host here.

The challenge is it won't fit on the tractor. Its too narrow by about an 1/8 of an inch.

Any suggestions???
 
(quoted from post at 19:47:48 08/26/21) Hello Gentlemen,

I have a 51 8n and needed to replace the Top Link Rocker. I originally had a 3 pin rocker.

I purchased an after-market one from our awesome host here.

The challenge is it won't fit on the tractor. Its too narrow by about an 1/8 of an inch.

Any suggestions???
Click to expand...

I would call them and see what they say!
 
Do you mean the pin that connects onto the case is too small or that the hole spread on the implement linch pins is too small? You need part number NCA-535-A. The 3-Hole Rocker uses p/n 8N-486-B to connect the rocker to the case boss. It is 1 in diameter and 3-5/16 long. It matters where you buy from.


Tim Daley(MI)
 
You must log in or register to reply here.

Similar threads

D
3010 Gas not getting enough oil to rocker arms
Replies
5
Views
689
Glen D Anderson
G
O
Brush Hog Top Link and Limiter Chain Location
Replies
4
Views
1K
KristofMI
K
D
Template for grinding lift cover opening for new cylinde
Replies
3
Views
647
Ultradog MN
Ultradog MN
P
International 424 Top Link Pin
Replies
6
Views
673
JimB2
J
R
TO30 Hydraulics (part 3)
Replies
2
Views
511
ruschman
R
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top