|
| |
| Ford 9N, 2N & 8N Discussion Forum |
Help with wheel seal parts-similar to Bearcats que
| Author |
[Modern View] |
|
Hidude
02-21-2021 13:23:47
|
Hi all. I have a 50 rear half with 52 engine. Having a hard time figuring out what wheel seals i need. Read different things about when seal changes were made. I'd like to update to the style that is grease only if I don't have that now. Right side was leaking oil into the brakes so I'm not sure. If anyone could help with proper part #s and letting me know if an update is available i would greatly appreciate it. Everything is already apart as I'm working on a full overhaul and rebuild. First go with 1 of these tractors though
|
|
|
|
|
Rusty2N
02-21-2021 13:44:49
|
|
Re: Help with wheel seal parts-similar to Bearcats que in reply to Hidude, 02-21-2021 13:23:47
|
|
| |
If you are referring to the sure seal, they are for the 9/2n axles and won't work on the 8n. Check out my post below.
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Product Review - by Staff. When we finally checked out the 3000 PSI North Star, the whole story chaned. This unit was equipped with an 11 HP Honda engine with fuel shutoff, adjustable flow and optional syphon degreaser dispenser. It didn't have a pressure release or electric start to facilitate easy starting but according to the instructions, simply pulling on the trigger while cranking was sufficient. This method of starting proved more than adequate and kept the cost down on the unit. It had all the important
... [Read Article]
Latest Ad:
1967 Ford 3000
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
