Steering gear sector shim

hayes49

Member
I've taken tons of piks on disassemble but I missed this one and I'm sure more. Which way does shim/washer go on sector shaft of steering. 1st pik on the head of adjuster or 2nd pik between sector and steering gear side cover. 49 8n after 216988. Thanks once again for the help.
Hayes49

mvphoto60955.jpg


mvphoto60956.jpg
 
I just installed a sector rebuild kit in my 518N. I removed the pin/washer and reinstalled it like picture #1. Washer on the inside.
JB
 
(quoted from post at 09:55:44 08/29/20) I just installed a sector rebuild kit in my 518N. I removed the pin/washer and reinstalled it like picture #1. Washer on the inside.
JB
Thanks JB...after reading F0-4 for what seems the 100th time I seen where it called for a specific tolerance on it and specified it being like the first pik. Thanks again.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top