I left the Battery Cable as it was. Made sure all connections were good. Hat a 6.33v reading on the Pos. Side of starter switch.
Drops to 4.13v when I try to start. Same reading at other side of switch and starter when trying to start. 4.13v or so. Has Zero cranking power.
Gonna charge the Battery and see.
While I'm here..... what would I need at this point to make a 12v conversion?
I know the Coil has to be a 12v coil. I have one.
My starter has a sticker that says. 6 volt. I've seen one at tractor Supply that says 6 or 12 volt. Are they the same?