(800) 853-2651
SHOP NOW

$500 Tweety has a cousin

B

Bruce(OR)

Well-known Member
Somewhat ashamed to admit I paid $450 for this toy, however....
It came home in the cold rain and just got parked for the night and maybe tomorrow should get off loaded.

cvphoto45684.jpg


The exhaust system drops into this box affair that then went up next to the now removed canopy.

cvphoto45685.jpg


Obscure voltage regulator the PO was running 12V on. Still has 6V genny Wanna bet it is fried?

cvphoto45686.jpg


Running board with canopy bracket.

cvphoto45687.jpg


Tires look good enough for $450

cvphoto45688.jpg


Hot Rod draw bar.

cvphoto45689.jpg


Draw bar bracket. Another Farmerization.

cvphoto45690.jpg


More canopy brackets.

cvphoto45691.jpg


Bracket for what???

cvphoto45692.jpg


Hand clutch cut off?

cvphoto45693.jpg


Strange things inside front rims.






Previously I have only seen pictures of them.
Now I have a rear set from "Tweety" and a set from this toy.

I suspect I will be salvaging this unit for spare parts for her TO-20 or possibly sell a few items.

cvphoto45694.jpg
 
I was kinda'sorta thinking I might be able to sell parts, if I have to, to recoup the $450.
So in the past two weeks I am out $950 for weights for her Fergy.
I think she might start paying attention to this...I better get busy cleaning up this "enterprise".
 
My 8N had those weights on it when I was a kid.
I always thought they were concrete back then.
I took them off about 20 years ago when I needed new rims and put them on the back of a MF 30B I had then with a loader.
Had a stack of weights on the back of that thing.
They finally went down the road on that loader.
Richard in NW SC
 

This one's for you Bruce(OR)

https://salem.craigslist.org/grd/d/dallas-wanted-front-wheel-weights-for/7131358636.html
 
Saw a pair of those in my north 40 yesterday along with a set of pie weights. Was looking for something else.
 
Which is why I gave $450 for this machine. A few days ago I got bored and looked under Ferguson tractor on craigslist. I spotted his ad and
figured, "Good luck with that". I then found the entire machine with weights and having a need for the front weights for some time now, I
called up the owner of the complete machine. We talked awhile and he lowered the price to $450.
So, I said "Yes" and then told/asked the wife I bought another machine... So we took a short 4 hour round trip. After she calmed
down a bit. Not much, just a bit with a tone of resignation at my ongoing ignorance.
 
Is the rear of the differential housing broken from the forces downward on the receiver hitch? Any fluid in the trans/differential?
 
The lid was removed before i got it....
It ran for quite possibly the last time when it got loaded.
He kept the 12V battery and it's wired for 6V from appearances.
Tweety needs a 6V batt when I get it ready to start.
 
Don't know, didn't check. I just had the PO run it long enough to back onto trailer before he pulled the battery out of it.
That drawbar does not tilt.
 
You must log in or register to reply here.

Similar threads

B
For $500 you get. . .
Replies
8
Views
527
hunkydory
H
S
1951 John Deere Model A Throttle Hunting and Choking to Idle
2
Replies
21
Views
5K
stoltz23
S
K
Farmall H Farmstock
Replies
1
Views
612
Shawn W
S
W
I don't like it, but that explains it
Replies
10
Views
3K
Hendrik
Hendrik
A
Farmall m is a professional starter button burner upper
Replies
15
Views
6K
caterpillar guy
C
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top