From GB. in MT. To All you 'N' Owners

GB in MT.

Well-known Member
[size=18:86c9600bf7][/size:86c9600bf7]
Since I gave Hermie (The 2N), to my Grandson, I thought I would let you guys know........I'm still reading here, on the 'N' forum, SOOOoooo......watch what ya say about me.....even if it IS true!!!
I made a little something for you guys.
Print it out, and hang it on yer wall.......I Did!!! :wink:

mvphoto47721.jpg


Pic. taken off a Christmas card that I received this yr.

Gary
 
I don't know Gary, that sounds like a lot of effort to me.
Especially that "don't blow a gasket" part! ;)

I measured the ice on an old tractor hood I had to get into today.
It was just a little over 3/8 inch thick. That's overnight accumulation.
The roads are a little bit of a mess, to say the least.
No snow though, so I don't have to plow. :roll:
 
Gary, You are always welcome here and you have my permission (for what its worth) to post pictures of blue tractors.
 
(quoted from post at 10:28:22 01/13/20) Gary, You are always welcome here and you have my permission (for what its worth) to post pictures of blue tractors.
Thanks H.C.
Yer a good man......( for what it's worth) :lol:

Gary
mvphoto47762.jpg

Just to be on the safe side........there are both...(Gray/red, and BLUE)
:wink:
 
(quoted from post at 19:57:59 01/12/20) [size=18:34d167fb9b][/size:34d167fb9b]
Since I gave Hermie (The 2N), to my Grandson, I thought I would let you guys know........I'm still reading here, on the 'N' forum, SOOOoooo......watch what ya say about me.....even if it IS true!!!
I made a little something for you guys.
Print it out, and hang it on yer wall.......I Did!!! :wink:

mvphoto47721.jpg


Pic. taken off a Christmas card that I received this yr.

Gary
hanks for posting that.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top