Mystery Knobs

cruxthedog

New User
Ok guys I have searched the interwebs high and low, and just can't seem to find a diagram or any information on these two knobs on my 8N.One has a spring that plunges the knob up and down and the other appears to be broken off, it just spins around.

Can one of you crafty old vets help a young guy out?

Thanks Alex
mvphoto41883.jpg




mvphoto41884.jpg


mvphoto41885.jpg
 
The one w/ the spring allows you to use remote hydraulics off the belly pump w/o trying down the lift arms. Not sure what the broken one might be.
75 Tips
 

Bruce
OK so on the remote hydraulics, I should have a external hydraulic hookup somewhere then?

And thanks for the 75 Tips
 
(quoted from post at 17:02:25 09/07/19)
Bruce
OK so on the remote hydraulics, I should have a external hydraulic hookup somewhere then?

And thanks for the 75 Tips

When remote operation is selected by the knob raising the hydraulic control lever delivers external pressure via the tractor's test port and operation of the 3pt lift is disabled.

ISTR that setup was used with a trencher attachment and the second knob was used to control some aspect of the trencher operation. I suspect JMOR is the guy with the full skinny and some pictures of the inside of the case.

TOH
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top