Carb studs 48 8N

Golden Retrievers · Oct 14, 2018

Any suggestions on where to get carb studs (carb to manifold) not able to find part number? Napa or other source and part number would be appreciated.

Royse · Oct 14, 2018

Dorman part # 675-091 I order them from Summit Racing but
many places carry Dorman products. Might try a big box store.

Den N Ms · Oct 14, 2018

Golden ,Got a O'Reillys store near you? Dorman AutoGrade Double End Stud

Part #675-091
OReillys

Tim PloughNman Daley RIP · Oct 15, 2018

All studs are made with one nominal size, but each side has a coarse thread end side and a fine thread end side. Coarse threads ALWAYS screw into cast iron. The fine thread accepts the fastener/nut. The Ford Tractor Marvel-Schebler TSX 33 and 241 carbs use p/n 883710 S7-8, a 5/16-18 x 5/16-24 x 1-1/4" long stud. Thus the 5/16-18 end (Coarse Thread) screws into the carb flange. the 5/16-24 end (Fine Thread) accepts the hex nut and lockwasher. Most auto parts stores should carry them but probably not at that length so watch it. I trust NAPA as stocking them. I use McMaster-Carr for all my hardware needs. I buy in bulk, and usually at the same price for 100 as most places charge for one or two.

Tim *PloughNman* Daley(MI)

Carb studs 48 8N

Golden Retrievers

New User

Royse

Well-known Member

Den N Ms

Well-known Member

Tim PloughNman Daley RIP

Well-known Member

Similar threads