600x16 Tires and Wheels for my 45 2N

allenlane · Oct 6, 2018

My tires finally gave up the ghost, so I'm going to have to replace. Doesn't appear 6x16's came on these 2N's but they work fine. I looked on here and see only 4x19's. Do you guys have a recommended supplier of 6x16 tire/wheel combinations?

Den N Ms · Oct 6, 2018

allenlane,16"front rims for a 9N/2N were made by Kelsy/Hayes Not really plentiful but they out there.some used hubs and wide 5 wheels from like a 37 ford car,or even hubs and wheels from a later model pickup.Oh by the way I think Royse had a pair of 16" 9N/2N rims he cleaned up and painted awhile back you might contact him to see if he still has them.I have a pair that I put new rims on the 2N centers and new tires on my 43 war model 2N.

hd6gtom · Oct 7, 2018

Allenlane-- good idea.

Royse · Oct 8, 2018

"I think Royse had a pair of 16" 9N/2N rims he cleaned up and painted awhile back"

You have a very good memory Den! I had the rims sandblasted,
primed and painted them, put brand new tires and tubes on them,
then sold the tractor I intended to put them on.

I still have them and I would sell them, but to be up front about it,
they would not be cheap. They've never been put back on a tractor.

howdy1960 · Oct 13, 2018

I am under the impression the 4X19s were replaced with the 16s when a FEL was installed.
Disclaimer, "I am far from an expert so take what I say as a grain of sand"

600x16 Tires and Wheels for my 45 2N

allenlane

Member

Den N Ms

Well-known Member

hd6gtom

Well-known Member

Royse

Well-known Member

howdy1960

Well-known Member

Similar threads