Bracket on 2N

Scott1ky

Member
Found this picture of a bracket in the archives.. does someone have a picture of the correct way to mount this bracket to the tractor? My 2n didn't have the spring but it came with the bracket. Neither of my 8n's have this bracket or spring. Not sure what it does or if it is necessary. The generator will bolt on and stay tight just like the 8n's without the bracket so it may not even be needed.
a4678.jpg
 
<img src = "http://i179.photobucket.com/albums/w309/Sean_TX/New%20N/IM000849.jpg">

Also from the archives, with a home-made rod/bolt.

"The first factory generator tensioner was Jan, 1945 on the 2N10000 generator and attached to the generator barrel with two 1/4-28 bolts."
Bracket
 
(quoted from post at 09:37:19 09/03/09) Found this picture of a bracket in the archives.. does someone have a picture of the correct way to mount this bracket to the tractor? My 2n didn't have the spring but it came with the bracket. Neither of my 8n's have this bracket or spring. Not sure what it does or if it is necessary. The generator will bolt on and stay tight just like the 8n's without the bracket so it may not even be needed.

Simply bolts up to the two headbolts next to the generator

TOH

tensioner-diagram.jpg
 
My 41 9n has much the same engine bracket on it,but has a shorter generator bracket that bolts on with 2 small screws same spring but pc. all thread&3 nuts.
 
My 41 9n has much the same engine bracket on it as Old Hokies,but has a shorter generator bracket that bolts on with 2 small screws same spring but pc. all thread&3 nuts.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top