Hydraulic coupler dust plugs

Alan K

Well-known Member
Anyone have any of these dust plugs for the MM hydraulic outlets? I would consider ones that don't have a good loop and just the
plug end.
cvphoto150460.jpg
 
those are just standard covers for any tractors with hyd. i have a few sets of the aluminium ones. they are not M.M. specific.
 
These are MM specific for the Bruning brand couplers. The standard ones for Pioneer and others don't go deep enough.
 
Yes, I believe I have a couple of those as well. The Bruning couplers have about 5/8 inch from the edge to the row of balls. The Pioneer ones have about 3/8 of an inch or so. I thought about buying some of the rubber ones for Pioneer and shaving off the outside lip but that still wouldn't go in far enough.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top