(800) 853-2651
SHOP NOW

Mm zb hydraulic cover

P

pvictor15

New User
the hydraulic cover leaks on my zb. Have had it welded up many times but doesn't last. Anybody else have this problem? Anybody know where I can find a good used one?
Thanks
Gordon
 
[qu5thote="pvictor15"](reply to post at 09:44:31 06/26/22) [/quote]

No its the cover thats bolted to the pump with 2 attached hydraulic hoses
 
The triangular flange that has a pipe and a hose coming out of it? Im betting it cracked where the hose is screwed into it? Most of
the time it happens from over tightening it. Make sure you get one to match your hydraulic pump as they are different between the
two pumps that were used. The round pumps were Eaton brand whereas the flat sided ones were replacement Webster brand pumps. The
Webster flanges I believe were 1/4 turn of the flange so there would be 2 bolts towards the top and one on the bottom. The Eaton
ones were one bolt on the top and two on the bottom.
 
Yep its leaking where I screwed in the hydraulic hose and yep I may have over tightened it. Any ideas where I can find another?
Thank you
 
If it has two hoses and is bolted to the pump it should be as Allan says, one hose and a return pipe. Then somebody has made some changes. I am questioning what you have, maybe aftermarket or farmer setup. MM original should be a 3 corner plate with 3 bolts. I do have one that takes two hoses off a UNI tractor. And I may have MM one for a ZB if Chris doesn't. We need to see pictures to help you out.
MMDEL
 
(quoted from post at 08:08:48 06/27/22) If it has two hoses and is bolted to the pump it should be as Allan says, one hose and a return pipe. Then somebody has made some changes. I am questioning what you have, maybe aftermarket or farmer setup. MM original should be a 3 corner plate with 3 bolts. I do have one that takes two hoses off a UNI tractor. And I may have MM one for a ZB if Chris doesn't. We need to see pictures to help you out.
MMDEL
Click to expand...

I will get some pictures tonight when home from work. It is triangle, 3 bolts and a bottom hose and pipe above that. Pretty sure its stock.
 
You must log in or register to reply here.

Similar threads

J
Massey ferguson 135 top cover set up
Replies
1
Views
257
MF#1
M
T
MM Canadian UTS - Date of Mfg?
Replies
12
Views
510
tirediron
T
mdm1
Hydraulic pump leaks.
Replies
6
Views
281
mdm1
mdm1
R
8n Govenor Housing Warped and Leaks Oil
Replies
14
Views
552
HFJ
H
R
Delco starter drive
Replies
11
Views
656
rrlund
R
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top