|
| |
| Minneapolis Moline Tractors Discussion Forum |
KEC rod and main torque
| Author |
[Modern View] |
|
iowa806
04-07-2021 12:04:24
|
Can anyone tell me the torque for rods and mains on a 39 uts. It has the KEC block with babbitt bearings. I have the I&T manual but they are not in there.
|
|
|
|
molinegb
04-07-2021 17:35:00
|
|
Re: KEC rod and main torque in reply to iowa806, 04-07-2021 12:04:24
|
|
| |
There is no torque specs on babbit KEA or KEC,KED. Just remove or add shims till not tight and pin them. Go by bolt size for rough. 65-70. Not high rpm's.
|
|
|
|
iowa806
04-07-2021 18:02:01
|
|
Re: KEC rod and main torque in reply to molinegb, 04-07-2021 17:35:00
|
|
| |
Ok I had a feeling that was the way it was done but wanted to make sure. Thank you for the information
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
INTERCOOLER and INJECTION LINES for IH DT414, 436 and 466 diesel engines, can ship.
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
