Casting number identification.

Mollie Deere

New User
I am very new to world of Minneapolis Moline. I purchased a pulling tractor this spring; a UB, but the motor is not from a UB. I have a slight rear main leak, and would like to know what block, or engine I should even be buying parts for. I'll also pass along the casting numbers for the jugs and heads, so maybe you folks can tell me what I'll be working with, should something else goes wrong. Engine block is either 10A2808T, or 10A2803T{casting is a little mottled}. Jugs are 10A22875, and heads are 10A4231. I really like this tractor, good power, strongly built, and seems very modular. Any help with the numbers would be appreciated. Thanks so much MD
 
3 bolt starter is most likely a 336. Large starter likely 403, smaller starter the original type 283. Possible exceptions but a place to start.
 
Thank u very much. For your information.. will do what I can to get the rear main fixed after next month, when pulling season is over. MD
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top