Plainsman 1600 hyd help

magman

Member
Hi guys, My Neighbor inherited a 1600 white plainsman and a A4T for parts It has been sitting in the pole barn for about 6 years. he fired it up took it out and has blown the belts 3 times to the Hyd 's I guess. He says it acts like its not releasing the pressure and he thinks its building up. I want to look at it for him but do not know where to start?
TY Jon
 
The only belt driven hydraulics on an A4T should be for the power steering. The main tractor hydraulics are from an engine mounted gear drive pump.
 
(quoted from post at 13:43:04 05/30/20) The only belt driven hydraulics on an A4T should be for the power steering. The main tractor hydraulics are from an engine mounted gear drive pump.
TY So is there a valve that may need cleaning? A flush?
TY Jon
P>S The guy inherited a large barn full of minnies. G705, G706, G1000 ,M5,Ub's So there are also a lot of parts down there.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top