AGCO part numbers

Handclutch · Oct 16, 2019

I am hoping somebody might have online access to AGCO part numbers. About 20 years ago I bought some parts from a supplier here in Australia. The story is that he had acquired an entire stock of MM/White parts when a warehouse closed down in Brisbane. I've just found a couple of small parts in AGCO bags at the back of the shed and don't recognise them, or remember what they were for. The part numbers are 30?3139328 and 20?0007249. Thanks to anybody who can help.

Jack

Wisconsin Cowman · Oct 16, 2019

20-0007249 is a rear bearing retainer seal 3-3/8? long used on Oliver 2155,2655. Minneapolis Moline G1350 and A4T 1400/ A4T 1600 series. Part number 30-3139328 I can?t find were it was used or much information on the part number. This is all I find, it supersedes to part number 70277484 which is a crankshaft kit. Which includes 2 seals, install tool, adhesive, and instructions.

molinegb · Oct 16, 2019

First number is listed a a wire. for 670 G1000 1050. Other is a seal for 670 g1000 A4t and many other models.

J. Schwiebert · Oct 17, 2019

In simple terms, part numbers with a 20 prefix are MM parts, Numbers with a 30 prefix are parts that were from the Charles City plant in other words Oliver tractor parts. However in this case the part number is for the late Moline engines that were assembled in Charles City, GB, it is not a wire. More details later

Handclutch · Oct 21, 2019

Thanks to all for going to the trouble. The first part number does indeed relate to wires - there are four of them in the bag approximately 2 inches long but not sure what they are for. At around that time I did buy a rear crankshaft seal kit for a M604. Perhaps they relate to it, although I can't see anything in the parts book. The second part number is on an empty bag. There were two small roller bearings near it with flanges. I had thought they had probably come from the bag but there was also a seal. Seems like the part number relates to the seal. I don't have any of the tractors that were mentioned, so still a bit of a mystery. Time dulls the memory - I might have acquired them along the way in a manner I don't recall.

Thanks again, Jack

Galen Houk · Oct 22, 2019

Where are you guys getting your part number information? I bought a large lot of Agco parts when the local Agco dealer sold out. I think most of the parts are gaskets. I want to sell them but have no idea what they are.

molinegb · Oct 22, 2019

Bought out a Cockshutt dealer many years ago. Main thing I wanted was microfiche and master cross references. Got many parts also. Along with older books now can cross most. Some of above parts are not regular numbers but in supplement manuals so # can get lost.

AGCO part numbers

Handclutch

Member

Wisconsin Cowman

Member

molinegb

Well-known Member

J. Schwiebert

Well-known Member

Handclutch

Member

Galen Houk

Member

molinegb

Well-known Member

Similar threads