M-670 Super Torque Amplifier

idt-572 · Sep 17, 2019

This is a two speed unit. How many clutches and steels does this unit require, and in what order do they go in the basket?

I ordered a new set and I end up with a steel on the end of the stack. It seems to me their should be a fiber on each end to run against the basket bottom and the pressure plate...........

Looks like I need one more fiber disc.

ChrisQ · Sep 17, 2019

Quick looking, book shows 4 friction and 3 steel. Although I was thinking there is more than that. Either way, the pack should start and finish with friction

idt-572 · Sep 18, 2019

(quoted from post at 19:38:45 09/17/19) Quick looking, book shows 4 friction and 3 steel. Although I was thinking there is more than that. Either way, the pack should start and finish with friction

They shorted me one, my book shows a picture of it, but it's not very clear. I knew you couldn't run a steel at the end of the pack.

Thanks for the reply...........

M-670 Super Torque Amplifier

idt-572

Member

ChrisQ

Member

idt-572

Member

Similar threads