I recently rebuilt my jet star water pump, with help from this Forum. That went well. The problem I am now having is the 2 "O" ring on the sleeve
from the WP to the engine block won't seal.I finally got it to stop leaking while cold but as the engine warmed up they began to leak again.
Relieved the pressure but still leaked. There must be a secret to getting them to seal. I did replace both o rings and cleaned sleeve ends.
Any suggestions would be greatly appreciated.
Thank you
Jim
from the WP to the engine block won't seal.I finally got it to stop leaking while cold but as the engine warmed up they began to leak again.
Relieved the pressure but still leaked. There must be a secret to getting them to seal. I did replace both o rings and cleaned sleeve ends.
Any suggestions would be greatly appreciated.
Thank you
Jim