MF Special tools

Rust-o posted in 2015 asking about MF tools # 124,163,and 970. These are the same tools I need and can't find. Plus there is no one around that knows how or has the tools. My question is; Are your answers correct.
 
Howard email me and I will get you my phone number. I made a MFN-970 and MFN-163. MFN-124 you just need .170 +/- .010 (for a 180 per the book) so you just use a feeler gauge for that no need for the special tool.

MFN-970 is just giving you clearance to the case. From my looking I'm not sold the amount is crucial as much as just having clearance there is but I measured a dealers tool and machined one. MFN-163 is just a simple wedge to hold the dash pot open. I bent steel and used my grinder to make it into an angle.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top