craigegross
New User
Good evening. I am looking for some assistance. After reading through several posts on here, I am still stumped on a resolution.
My folks tractor was severely leaking oil between the rear axle and the transmission. While attempting to fix that, we split the tractor (and inadvertently broke the dash pot in the process).
We got a replacement part and have re-assembled the tractor, making sure we had everything lined up and torqued down.
After putting in new oil, we were ready to load up the tractor and take it back to the folks, but we are unable to get the three point arms to raise (not sure about lowering). Also not sure if the rear hydraulics are working.
We have replaced the oil, confirmed the level, checked the linkage for the quadrant. Confirmed that linkage is moving when the response control cover is removed.
At this point, I am unsure what else to try/do to get the hydraulics working again.
I have several pictures of how everything came apart and was put back together if that is helpful.
Appreciate any and all assistance!
My folks tractor was severely leaking oil between the rear axle and the transmission. While attempting to fix that, we split the tractor (and inadvertently broke the dash pot in the process).
We got a replacement part and have re-assembled the tractor, making sure we had everything lined up and torqued down.
After putting in new oil, we were ready to load up the tractor and take it back to the folks, but we are unable to get the three point arms to raise (not sure about lowering). Also not sure if the rear hydraulics are working.
We have replaced the oil, confirmed the level, checked the linkage for the quadrant. Confirmed that linkage is moving when the response control cover is removed.
At this point, I am unsure what else to try/do to get the hydraulics working again.
I have several pictures of how everything came apart and was put back together if that is helpful.
Appreciate any and all assistance!