Youngguyoldtractors
New User
hi. what i though would be a simple no start is killing me. cant find any specific wiring diagrams but. ive replaced the
key/ignition
regulator
starter solenoid.
i by passed the neutral switch and put power from starter solenoid right to key turn on position which ill fix once running.
but when i turn my key i get no power to this wire. but when i disconnect it from the solenoid i get power on the wire...
only thing i find strange is im getting ground on the top reg post which goes the the alternator. i removed both wires from alternator just to see and there's still ground ontop is that correct? i come from power sports so we dont use alternators. but its ac? so ground ontop seems fine anyone know where to guide me in very lost.
some reason my picture isnt working?
also tried jumping the solenoid and nothing happened.
This post was edited by Youngguyoldtractors on 09/15/2021 at 03:37 pm.
key/ignition
regulator
starter solenoid.
i by passed the neutral switch and put power from starter solenoid right to key turn on position which ill fix once running.
but when i turn my key i get no power to this wire. but when i disconnect it from the solenoid i get power on the wire...
only thing i find strange is im getting ground on the top reg post which goes the the alternator. i removed both wires from alternator just to see and there's still ground ontop is that correct? i come from power sports so we dont use alternators. but its ac? so ground ontop seems fine anyone know where to guide me in very lost.
some reason my picture isnt working?
also tried jumping the solenoid and nothing happened.
This post was edited by Youngguyoldtractors on 09/15/2021 at 03:37 pm.