Massey ferguson 35 foot throttle fit

Massey3518 · Jul 1, 2020

Hi all, hope everyone is keeping well and
safe.
I'm fitting a foot throttle to a MF35.
I've all the parts and fittings bar 1
crucial part that can't be bought.

Part 72 where the arrow points. Just
wondering if anyone has any advice to the
length and and angle of the bends to
linkage?
Thanks in advance.

495man · Jul 1, 2020

If you can confirm it's the same as a MF 240 I can get you dimensions.

It LOOKS the same and a 240 is a couple gens newer than a 35.

Massey3518 · Jul 1, 2020

Hi yes it's the same as the linkage on
the MF 240 foot throttle. I'd really
appreciate that thank you.

495man · Jul 2, 2020

(quoted from post at 13:23:45 07/01/20) Hi yes it's the same as the linkage on
the MF 240 foot throttle. I'd really
appreciate that thank you.

Hope this works. [/img:217e7f4c6d]

495man · Jul 2, 2020

(quoted from post at 13:23:45 07/01/20) Hi yes it's the same as the linkage on
the MF 240 foot throttle. I'd really
appreciate that thank you.

495man · Jul 2, 2020

(quoted from post at 13:23:45 07/01/20) Hi yes it's the same as the linkage on
the MF 240 foot throttle. I'd really
appreciate that thank you.

The rod would lay flat, just a 5/16" rod with two bends, a hole on the end for a cotter pin and a washer welder on the 1 7/8" part to hold it in place on the pedal.

Massey3518 · Jul 3, 2020

Thank you, this is exactly what I need.
Greatly appreciated.

Massey ferguson 35 foot throttle fit

Massey3518

Member

495man

Well-known Member

Massey3518

Member

495man

Well-known Member

495man

Well-known Member

495man

Well-known Member

Massey3518

Member

Similar threads