Is it possible my 3pt lever isn''t connected to anything?

My Perkins diesel Massey 35 has never had a working 3pt hitch arm. Well its times I repair that. The lever sure feels like its disconnected. If I remove the side cover that has the dipstick will I see anything? Any tips and tricks on what to look for before I tear it apart. And if the levers are hooked up would I think remove the cover that the seat is on?
 
This is why I think someone messed up something. Those washers...I am going to try to dig into that cover Sunday. I am going to also reference the service manual as well as these pictures - thanks all
 
AedfEjxp

fBFs8gn1


Does anything look suspect here? I just don't know what I am looking at so I think the top plate has to come off. Those vertical rods I can move around back and forth. The top where they are attached I don't think i see any jamb nuts does that look OK?[/url]
 
(quoted from post at 16:02:39 06/12/20)
AedfEjxp

fBFs8gn1


Does anything look suspect here? I just don't know what I am looking at so I think the top plate has to come off. Those vertical rods I can move around back and forth. The top where they are attached I don't think i see any jamb nuts does that look OK?[/url]


If you right click on these, in modern view, then click on load in new page they come up, but I don't know what I'm looking at.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top