MF 560 dual clutch

Hi, if it's a dual clutch tractor then the pto plate screw clearances should be adjusted first. Set them to 080-090". This is the normal figure but it can be reduced slightly if there is wear in the pedal linkage. Adjust the pedal next. The pto without any load shold sto turning with approximately one inch of pedal travel remaining. There should be around one inch of free travel on the pedal before pressure is felt.
DavidP, South Wales
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top