3pt log splitter

steve19438 · Jan 8, 2019

is this something my MF 50 could handle ? (not too slow ?)
Untitled URL Link

miner09 · Jan 8, 2019

Should work good. Not sure what GPM your pump is.

Tom Massachusetts · Jan 8, 2019

I have a similar splitter on my MH50 and had to use a PTO pump. The tractor hydraulics were too slow.

John Deere D · Jan 8, 2019

I have a similar home built splinter......MF FE 35 X....

At 2200 PSI hydraulic supply pressure..

(1) I had to Increased Cylinder to 5" diam...
(2) GPM of MF FE 35 X pump was quite low..
(3) 16" knotty dry pine required the 5" diam Cylinder....
(4) Attached splinter to my Case 830....GPM of Case is such that Cylinder operates at perfect speed..

Bob.....

ptfarmer · Jan 9, 2019

The hydraulic pump on the 50 is around 4.5 gallons per minute (gpm), the pump on the 830 Case is supposedly around 15 gpm.

steve19438 · Jan 9, 2019

thanks fellas. I guess I will pass.

3pt log splitter

steve19438

Well-known Member

miner09

Well-known Member

Tom Massachusetts

Member

John Deere D

Well-known Member

ptfarmer

Well-known Member

steve19438

Well-known Member

Similar threads