(800) 853-2651
SHOP NOW

165 multi power not working

S

steve in wi

Member
Just bought a 165 diesel, changed hyd oil
that was milky and cleaned hyd screen
behind PTO cover. Three point works but I
can't get any thing to make multi power to
work. Adjusted and moved lever coming out
of bell housing to see if it works
Nothing how do I trouble shoot this multi
power unit. Gauges some where. Or just
split it right away
Thanks
 
Very early tractors had no MP test port lines, late tractors with the cooler and front MP filter in front of the radiator have a test port elbow cap just above the clutch housing area. If the clutch pack has to come out, it requires a double split to remove the complete transmission. If the tractor has the IPTO option, there's a MP/PTO pressure test port on the PTO shift side cover.
 
Could also pull the three point cover, then with a made up line with gauge and valve see how the MP pump checks out. If it checks OK then you will need to go deeper.
 
(quoted from post at 02:57:44 11/09/18) Very early tractors had no MP test port lines, late tractors with the cooler and front MP filter in front of the radiator have a test port elbow cap just above the clutch housing area. If the clutch pack has to come out, it requires a double split to remove the complete transmission. If the tractor has the IPTO option, there's a MP/PTO pressure test port on the PTO shift side cover.
Click to expand...
From Dieseitech's post : late tractors with the cooler and front MP filter in front of the radiator... if you have a filter check that filter before you split it..
I have a MF 180 that had the same problem with the MP , the filter was plugged causing the problem. No guarantee that it is the problem , but a whole lot easier that splitting it..
 
You might try starting the tractor remove the battery and pull up on the post that the multi-power linkage hooks to. Vise-grips help. Drive the tractor to test weather it is working or not. That got mine going again.
 
You must log in or register to reply here.

Similar threads

D
massey 1155 multi power slip
Replies
2
Views
346
Duallymike88
D
J
MF 165 HYDRO PROBLEMS LIFT AND AUX
Replies
0
Views
221
John 76
J
J
MF 165 HYDRO PROBLEMS LIFT AND AUX
Replies
0
Views
196
John 76
J
J
555 hydraulics not working
Replies
1
Views
207
Check Break
C
J
Hydraulics not working proper on 555
Replies
6
Views
356
Check Break
C
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top