MF34 loader bushings

StNick

Member
I am looking for a source for some bushings off an MF34 loader (on an MF30 tractor). The dealer says they are no longer available through him. The MF part number is 708 085 M1. Any help would be appreciated.
 
The bushings measure 1" x 1-3/16" x 2-1/2" you should be able to have some made, I make my own when I can't find anyone who has a specific bushing.
 
Thank you so much for the information. If I can't locate the bushings, at least I'll be able to have them made. I want to replace all the bushings in the loader and I want to have them all before I start. Thanks again. I don't have the tools or the knowledge to make my own.
 
Thanks so much for the help. I need a total of four. That's what the parts book shows. I tried to reply via email but my system didn't like the return address. I want to change all the bushings in the loader but need to have everything on hand before I start. Nick
 
Just out of curiosity, since you have done it, how hard is it to replace the bushings in a loader? Do you need any special tools? Or is this a job I should have a mechanic come out and do? Thanks Nick Marks
 
Thanks for the dimensions for the bushings I need. I know someone that can make them. Where did you get the measurements from - is there a part drawing for these bushings? Thanks Nick Marks
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top