Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

1085 PTO Problem

Welcome Guest, Log in or Register
Author  [Modern View]

08-26-2012 08:37:35

Report to Moderator

Round baling yesterday tractor PTO suddenly stopped turning and makes a grinding noise I removed the baler and the pto turns all the time and is quiet. baler back on no turn and grind again. Ideas on what is wrong and can this be repaired with out splitting the tractor

[Log in to Reply]   [No Email]

08-27-2012 19:02:50

Report to Moderator
 Re: 1085 PTO Problem in reply to Ten10, 08-26-2012 08:37:35  
I have a MF 1085 and when the pto quits working I usually have to add hyd oil. Roy

[Log in to Reply]  [No Email]

08-27-2012 17:27:27

Report to Moderator
 Re: 1085 PTO Problem in reply to Ten10, 08-26-2012 08:37:35  
Multi pwr working ok, check the oil in the filter housing(looking for pto clutch fibers). The bearing that Dave is talking about is held in place with a snap ring. I have replaced them and they aren't hard to do

[Log in to Reply]  [No Email]

08-27-2012 05:33:14

Report to Moderator
 Re: 1085 PTO Problem in reply to Ten10, 08-26-2012 08:37:35  
There is a bearing in the rear portion of the carrier that holds the shaft. I'd bet its going south.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy